[ previous ] [ next ] [ threads ]
 To :  yate@v...
 From :  Milan Rukavina <rukavinamilan@g...>
 Subject :  Sangoma USBfxo analog card
 Date :  Fri, 21 May 2010 20:44:39 +0200
Hi All,

I bought recently Sangoma USBfxo device
http://wiki.sangoma.com/sangoma-wanpipe-usbfxo.I succeeded to install
drivers /zaptel and run USBfxo with Asterisk, but my target platform is
Yate with zapcard/analog modules. The only thing I made to work for now
is to make my SIP phone ring on incoming calls, but when I pick up a
call nothing happens. Also, when caller hangs up - sip still rings.
Caller ID is not present, but it works with Asterisk.

Also, I'm not able to make outgoing call - it's routed well to analog
module but it freezes in status trying.

Is there anything particular I should look at and change in
configuration files:

*zapcard.conf:*
[span1]
type=FXS
offset=0
voicechans=1

[span2]
type=FXS
offset=1
voicechans=1

*analog.conf:*
[house-fxs]
type=FXS
spans=span1,span2

*regexroute.conf:*
;outbound calls
^9\(.*\)$=analog/house-fxs;called=
;inbound calls
${address}^house-fxs/\(.*\)$=;called=1001

Thanks,
Milan