[ previous ] [ next ] [ threads ]
 To :  Milan Rukavina <rukavinamilan@g...>
 From :  Marian Podgoreanu <marian@v...>
 Subject :  Re: [yate] Sangoma USBfxo analog card
 Date :  Tue, 25 May 2010 10:39:25 +0300
Hi

This is an FXO card so in zapcard.conf type must be FXO not FXS.

Marian

Milan Rukavina wrote:
> Hi All,
> 
> I bought recently Sangoma USBfxo device
> http://wiki.sangoma.com/sangoma-wanpipe-usbfxo.I succeeded to install
> drivers /zaptel and run USBfxo with Asterisk, but my target platform is
> Yate with zapcard/analog modules. The only thing I made to work for now
> is to make my SIP phone ring on incoming calls, but when I pick up a
> call nothing happens. Also, when caller hangs up - sip still rings.
> Caller ID is not present, but it works with Asterisk.
> 
> Also, I'm not able to make outgoing call - it's routed well to analog
> module but it freezes in status trying.
> 
> Is there anything particular I should look at and change in
> configuration files:
> 
> *zapcard.conf:*
> [span1]
> type=FXS
> offset=0
> voicechans=1
> 
> [span2]
> type=FXS
> offset=1
> voicechans=1
> 
> *analog.conf:*
> [house-fxs]
> type=FXS
> spans=span1,span2
> 
> *regexroute.conf:*
> ;outbound calls
> ^9\(.*\)$=analog/house-fxs;called=
> ;inbound calls
> ${address}^house-fxs/\(.*\)$=;called=1001
> 
> Thanks,
> Milan