[ previous ] [ next ] [ threads ]
 To :  Bohumil Tosovsky <bohumil.tosovsky@g...>
 From :  Raj Roy Ghandhi <roy.gandhi@g...>
 Subject :  Re: [yate] Re: sccp.message - decode hexData param value
 Date :  Wed, 21 Jan 2015 16:04:20 +0530
Hi Bohumil,
Thanks for the mail.
Please find the ysigchan.conf below.

[general]
debuglevel=8,8,8,8,8
;debuglevel_engine=
;dtmfinband=no
;floodevents=20
;maxlock=10000 normally, -1 if Yate is started with -Dm
;datafile=
; Each section except [general] can have some common parameters
;enable=yes
;debugname=
;debuglevel=



[linkset1]
type=ss7-mtp3
netind2pctype=ITU
netindicator=national
;route=ITU,5-5-0
adjacent=ITU,5-5-0
local=ITU,5-5-3
;allowed=
router=ss7router
link=link1
slcshift=false
autostart=yes
checklinks=true
forcealign=true
checkfails=5000
maintenance=60000
;layer3dump=


[link1]
type=ss7-m2pa
autostart=yes
emergency=yes
autoemergency=yes
sig=sig111
filllink=yes
maxerrors=64
rxunderrun=0
layer2dump=



;[ss7router]
;type=ss7-router
;transfer=no
; Example: local=ITU,2-2-4
;local=
;management=ss7snm
;starttime=
;isolation=1000
;autostart=no
;autoallow=no
;sendupu=yes
;sendtfp=yes
; testroutes=50000
;testrestricted=no


;[ss7snm]
;type=ss7-snm
; Example: local=ITU,2-2-4
;local=
;priority=regular
;netindicator=national
;changemsgs=yes
;changesets=no
;neighbours=yes


[sccp]
type=ss7-sccp
pointcodetype=ITU
localpointcode=5-5-3
router=ss7router
;network=
management=sccp-mgm
hopcounter=15
ludt-support=false
segmentation-timeout=5000
extended-monitoring=true
print-messages=true
extended-debug=true
endpoint=true


;[sccp-mgm]
;type=ss7-sccp-itu-mgm
;test-timer=5000
;print-messages=false
;remote=2057:1,2,3,4
;concerned=2057:1,2,3,4
;local-subsystems=1,2,3,4,5,..
;auto-monitor=false


[gtt]
type=ss7-gtt
sccp=sccp


;[sccp-userd]
;type=ss7-sccpu-dummy
;sccp=sccp
;ssn=0



[hlr]
type=ss7-tcap-itu
local_SSN=6
default_remote_SSN=8
default_remote_pointcode=5-5-3
pointcodetype=ITU
sccp=sccp
default_hopcounter=false
transact_timeout=300
print-messages=true
extended-debug=true

;[smsc]
;type=ss7-tcap-itu
;local_SSN=147
;default_remote_SSN=8
;default_remote_pointcode=5-5-3
;pointcodetype=ITU
;sccp=sccp
;default_hopcounter=false
;transact_timeout=300
;print-messages=true
;extended-debug=true


;[tcapuser_test]
;type=ss7-tcap-user
;tcap=

Best Regards,
Roy.


On Wed, Jan 21, 2015 at 3:59 PM, Bohumil Tosovsky <
bohumil.tosovsky@g...> wrote:

>
>
>
> SCCP GTT is working, you must have configured sccp layer properly. Can you
> send your ysigchan.conf?
>
> 2015-01-21 8:52 GMT+01:00 Raj Roy Ghandhi :
>
>> Hi Friends,
>> Is there anyone who has done this ?
>>
>> Best Regards,
>> Roy.
>>
>> On Tue, Jan 20, 2015 at 12:01 AM, Raj Roy Ghandhi 
>> wrote:
>>
>>> Hi Friends,
>>> Is there a easy way to decode the  param['hexData']  in sccp.message and
>>> fetch the values in messaging level.
>>>
>>> param['hexData'] = '62 47 48 04 00 00 01 64 6b 1e 28 1c 06 07 00 11 86
>>> 05 01 01 01 a0 11 60 0f 80 02 07 80 a1 09 06 07 04 00 00 01 00 05 03 6c 1f
>>> a1 1d 02 01 01 02 01 16 30 15 80 07 81 49 97 28 22 33 f3 83 01 00 86 07 91
>>> 49 97 10 00 01 f1'
>>>
>>> I do no want to modify the camel_map.cpp
>>>
>>> Please advice.
>>>
>>> Best Regards,
>>> Roy.
>>>
>>
>>
>
>



Hi Bohumil,
Thanks for the mail.
Please find the ysigchan.conf below.

[general]
debuglevel=8,8,8,8,8
;debuglevel_engine=
;dtmfinband=no
;floodevents=20
;maxlock=10000 normally, -1 if Yate is started with -Dm
;datafile=
; Each section except [general] can have some common parameters
;enable=yes
;debugname=
;debuglevel=



[linkset1]
type=ss7-mtp3
netind2pctype=ITU
netindicator=national
;route=ITU,5-5-0
adjacent=ITU,5-5-0
local=ITU,5-5-3
;allowed=
router=ss7router
link=link1
slcshift=false
autostart=yes
checklinks=true
forcealign=true
checkfails=5000
maintenance=60000
;layer3dump=


[link1]
type=ss7-m2pa
autostart=yes
emergency=yes
autoemergency=yes
sig=sig111
filllink=yes
maxerrors=64
rxunderrun=0
layer2dump=



;[ss7router]
;type=ss7-router
;transfer=no
; Example: local=ITU,2-2-4
;local=
;management=ss7snm
;starttime=
;isolation=1000
;autostart=no
;autoallow=no
;sendupu=yes
;sendtfp=yes
; testroutes=50000
;testrestricted=no


;[ss7snm]
;type=ss7-snm
; Example: local=ITU,2-2-4
;local=
;priority=regular
;netindicator=national
;changemsgs=yes
;changesets=no
;neighbours=yes


[sccp]
type=ss7-sccp
pointcodetype=ITU
localpointcode=5-5-3
router=ss7router
;network=
management=sccp-mgm
hopcounter=15
ludt-support=false
segmentation-timeout=5000
extended-monitoring=true
print-messages=true
extended-debug=true
endpoint=true


;[sccp-mgm]
;type=ss7-sccp-itu-mgm
;test-timer=5000
;print-messages=false
;remote=2057:1,2,3,4
;concerned=2057:1,2,3,4
;local-subsystems=1,2,3,4,5,..
;auto-monitor=false


[gtt]
type=ss7-gtt
sccp=sccp


;[sccp-userd]
;type=ss7-sccpu-dummy
;sccp=sccp
;ssn=0



[hlr]
type=ss7-tcap-itu
local_SSN=6
default_remote_SSN=8
default_remote_pointcode=5-5-3
pointcodetype=ITU
sccp=sccp
default_hopcounter=false
transact_timeout=300
print-messages=true
extended-debug=true

;[smsc]
;type=ss7-tcap-itu
;local_SSN=147
;default_remote_SSN=8
;default_remote_pointcode=5-5-3
;pointcodetype=ITU
;sccp=sccp
;default_hopcounter=false
;transact_timeout=300
;print-messages=true
;extended-debug=true


;[tcapuser_test]
;type=ss7-tcap-user
;tcap=

Best Regards,
Roy.


On Wed, Jan 21, 2015 at 3:59 PM, Bohumil Tosovsky <bohumil.tosovsky@g...> wrote:



SCCP GTT is working, you must have configured sccp layer properly. Can you send your ysigchan.conf?

2015-01-21 8:52 GMT+01:00 Raj Roy Ghandhi <roy.gandhi@g...>:
Hi Friends,
Is there anyone who has done this ?

Best Regards,
Roy.

On Tue, Jan 20, 2015 at 12:01 AM, Raj Roy Ghandhi <roy.gandhi@g...> wrote:
Hi Friends,
Is there a easy way to decode the  param['hexData']  in sccp.message and fetch the values in messaging level.

param['hexData'] = '62 47 48 04 00 00 01 64 6b 1e 28 1c 06 07 00 11 86 05 01 01 01 a0 11 60 0f 80 02 07 80 a1 09 06 07 04 00 00 01 00 05 03 6c 1f a1 1d 02 01 01 02 01 16 30 15 80 07 81 49 97 28 22 33 f3 83 01 00 86 07 91 49 97 10 00 01 f1'

I do no want to modify the camel_map.cpp

Please advice.

Best Regards,
Roy.