[ previous ] [ next ] [ threads ]
 To :  Andre Sencioles Vitorio Oliveira <asenci@g...>
 From :  Gamaliel Bedolla <gbf@t...>
 Subject :  Re: [yate] Multiple offsets on a ISUP trunk
 Date :  Fri, 13 Feb 2015 16:47:07 -0700
Hello,
In your case you can configure the offset in the trunkgroup configuration
on ysgichan.conf:
example:

; LOCAL INTERCONNECTION TKS
enable=yes
type=ss7-isup
pointcodetype=ANSI
defaultpointcode=5-14-72
remotepointcode=249-11-100
voice=E1_1
offset=1

[toll_tks]
; TOLL TDM INTERCONNECTION TKS
enable=yes
type=ss7-isup
pointcodetype=ANSI
defaultpointcode=5-14-72
remotepointcode=249-11-100
voice=E1_2
offset=640

Hope this helps
Regards.

2015-02-13 16:28 GMT-07:00 Andre Sencioles Vitorio Oliveira <
asenci@g...>:

> Hello,
>
> I'm trying to configure a ISUP trunk and I stumbled upon a problem.
>
> I have two E1 links between my Yate server and a ISUP gateway, normally
> I'd define both links on the voice parameter, eg:
>
> offset=0
> voice=link1,link2
>
> But in my case the first link has an offset of 0 (CICs 1-31) and the
> second one has an offset of 640 (CICs 641-671).
>
> As far as I can tell from the sample configuration and from the source,
> this can't be done on Yate. Am I missing something? Any suggestions?
>
>
> Best regards,
> Andre
>



Hello, 
In your case you can configure the offset in the trunkgroup configuration on ysgichan.conf:
example:

; LOCAL INTERCONNECTION TKS
enable=yes
type=ss7-isup
pointcodetype=ANSI
defaultpointcode=5-14-72
remotepointcode=249-11-100
voice=E1_1
offset=1

[toll_tks]
; TOLL TDM INTERCONNECTION TKS
enable=yes
type=ss7-isup
pointcodetype=ANSI
defaultpointcode=5-14-72
remotepointcode=249-11-100
voice=E1_2
offset=640

Hope this helps
Regards. 

2015-02-13 16:28 GMT-07:00 Andre Sencioles Vitorio Oliveira <asenci@g...>:
Hello,

I'm trying to configure a ISUP trunk and I stumbled upon a problem.

I have two E1 links between my Yate server and a ISUP gateway, normally I'd define both links on the voice parameter, eg:

offset=0
voice=link1,link2

But in my case the first link has an offset of 0 (CICs 1-31) and the second one has an offset of 640 (CICs 641-671).

As far as I can tell from the sample configuration and from the source, this can't be done on Yate. Am I missing something? Any suggestions?


Best regards,
Andre